How To Paint Wood Trim White No Grain

When we moved into our house, I was overwhelmed past how much oak wood was in the house. The floors, trim, windows, doors, stairs were all oak. The cabinets in the kitchen and every bathroom cabinet was oak.

There was no color to break up the oak and it made the space look outdated, dark and smaller. Afterwards moving in, my get-go priority was to find out everything I could near painting oak wood white.

Hither is everything I learned after painting over 2200 square feet of trim white and the absolute best how to guide on painting oak trim white.

Should I paint my oak trim white?

The decision to paint the trim in your house white really comes downward to a manner question of if you like that wait. If you don't like the color it is now, then you should alter it.

In addition to really liking how white trim looks, the other reasons nosotros painted our trim, windows and doors white were:

What is the condition of the trim? Some of our trim was very one-time and actually couldn't wait overnice unless we either replaced or painted it.

Practice you want more "lite" in your firm? White has a high LRV (light reflectance value) and so that means information technology will bounce more light giving your space a brighter feel. As you tin see in this photograph, our house could use some more brightness.

Do you have a mixed theme? In our business firm, some of the doors are white and some are woods. Additionally, the frames in the window are white merely the windowsills are wood. Painting the trim white will give the space a cohesive look.

What color of trim goes best with your color scheme? Our oak trim had a very orange color to it and that meant we either had to piece of work with information technology or change it. I love white trim considering information technology goes with any color. For example, here is our girl's bedroom that is pink. The white trim (window in original trim color) was and then much more complementary to pinkish than our original oak.

Are you okay with a "bigger" projection than but painting oak trim white?

Changing colors in a room is a powerful way to transform any space only every bit you change colors, other colors might as well have to exist changed.

We know that if we changed the trim, we needed to likewise paint all of the windowsills and the doors.
We likewise realized that if we pigment the windows, then the shades wouldn't expect good at all. As you can run across in this photo. And I do have a program to fix this with white spray paint that coats plastic and some other white spray pigment that coats textile.

We knew that if we painted the trim, then we would want to modify the wall colour in the master living space.
We also know that there is a practiced adventure we will have to change, or stone coat the granite in the kitchen if we paint the cabinets.

Just know things like this could come up and you might not know until after you pigment white that other colors now don't work.

Paint oak trim or replace?

Another way to go from wood trim to white trim is to buy new trim and replace information technology. I ONLY recommend this is you take the advisable tools and are very adept at measuring.

We concluded upward replacing a few pieces because they were beyond repair. We had a few pieces of baseboard that were cracked and a few that had super quondam phone connections in them that left enormous holes.

Replacing trim will be more than expensive, just will take a lot less time. It will merely require ane coat of white paint (instead of 4-5 coats) considering information technology comes pre-primed. Y'all also never take to worry most the wood tannins coming through and giving you that yellowish stained look. Here is an example of what can happen if the forest tannins come through.

Some other thing to consider is that, you volition accept to use a grain filler on door trim if you have very harsh grain lines. It is non difficult to do just some other step.

How to Pigment Trim

Now that you lot take decided to paint the trim, you are ready to commencement. I recommend starting somewhere that doesn't matter like painting the trim within of a closet. This allows you to perfect your technique.

How long volition it take to paint trim?

The whole process can take anywhere from 3-4 days depending on how many steps you want to tackle each day. I recommend washing, fixing, and prepping the trim on mean solar day one. Y'all desire to wait until the side by side day to prime because you lot want the wood to exist completely dry out.

Virtually all wood will demand two coats of primer that will foreclose the yellow stain from showing up on the white trim. Do not skip this step! If you lot have a very dark wood, and then you might fifty-fifty need three coats of primer. Yous can prime on day two. Most primers tin exist top coated in 1 hour so yous could go both coats of primer on and the first coat of paint on in one day. After you lot paint your first coat of white, I recommend waiting 24 hours until yous apply the next. Painting a second coat on wet paint that is drying will brand the paint sticky and give you horrible brush strokes.

If you lot programme on painting all the trim in the whole house, so information technology could take y'all a month to a few months depending on how much time you lot are spending painting. From my feel, I would recommend not rushing and taking breaks when you go ill of painting. If you don't, then you will become sloppy.

How to Pick a White Paint?

Before y'all start painting, a disquisitional step will be picking a paint color and type. Before starting this process, myself, I really didn't think about the fact that there are hundreds of colors that are all white. This is because they all have different undertones. The very of import role to think is that white volition look white until you pair it with another white.

White Paints can alter colour based on surrounding colors

When y'all put two whites next two each other, you will come across the undertones and one will announced white and the other will appear yellowish, grey, chocolate-brown etc. In this first picture, you can run into that the color Swiss Coffee appears white.

Now if nosotros put Swiss Coffee adjacent to another white like Ultra-Pure White past Behr, you see the undertones and Swiss Coffee. Therefore, it is of import that you "only" accept one white in your firm.

Find out what white paints are already in your business firm

Commencement by finding out what white (ceiling color, cabinet color or door color) yous have in your firm and match it. Information technology is best to stay with this color. If you don't, then you gamble your ceiling or cabinets or doors looking yellowish or another undertone colour.

The white we picked for our trim

The only white in our house was the ceilings, which had minimal undertones. We tested three unlike whites.

We decided to go with Ultra-Pure White by Behr in the Marquee Base (it is so much better than the Behr Premium Base) because it matched our ceiling color all-time. It won't look yellow or choice up whatever other colors. It is too very vivid with a LRV of 94 and we wanted to maximize making the space feel brilliant.

The other top contender was the Actress White by Sherwin Williams.

Stay with the same brand and base

Besides know that you can mix and match any color with any brand. For instance, you lot can get Benjamin Moore colors at Habitation Depot in a Behr paint can. But once you start, you will ever want to get the same color in the aforementioned base. Since all brands have a unique starting base so the color will vary slightly between brands.

Pick a finish

At about paint stores, they take this very helpful chart that tells you what finish to utilize depending on what you are painting. For trim, the most common and recommended finish is a semi-gloss.

Steps to Paint Oak Trim White

There are really four steps to painting trim: wash, fix, prep and paint. If you read other tutorials, then you will run across they all follow this aforementioned idea. I read so many tutorials before I started and took detailed notes. After reading and painting our trim, this became my method that worked really well for me.

Stride 1: Wash the Trim:

Even if your trim doesn't look muddied, you however need to clean it. Most surfaces have oil, grease, and a layer of dirt on them. I was shocked at how much came off. The best function is cleaning trim is really very easy.

Get-go by gathering your supplies:

Cleaning Bucket
Water
Lint costless paint and cleaning rags
TSP substitute
Sponge
Gloves

Put on your gloves and mix TSP or TSP substitute with water at the specific ratio listed on the bottle. I use a cleaning bucket to mix. The reason TSP is used before painting is considering it doesn't demand to exist washed off the surface with water afterwards.

Now, have a sponge and dip it into your TSP water mixture. Ring it out so it is only damp. Now, wipe information technology across the trim. Y'all want the sponge to be moisture but not dripping. Exist careful to non get it on other surfaces and if you do wipe it off before information technology dries so it doesn't leave splotches.

Now, take your lint complimentary rag and wipe the surface. That's it! Just go on repeating until you have cleaned all the trim y'all programme on painting. I was very surprised at how muddied our trim was.

**The reason yous need to vesture gloves is that TSP is a skin irritant. If you get any on your skin, then wash information technology off immediately.

Step 2: Fix the Trim

Pigment can do a lot, just it cannot hide existing damage. Painters say painting is xc% prep work ten% painting. I couldn't agree more with this later on painting so much of our house. Every time I recollect "paint will cover information technology", I am always wrong. Then take the time to brand your surface smooth past fixing holes and gaps.

The two ways you can repair the trim is by using a soft wood putty to fill in nail holes or cracks.

Basically, take a minor corporeality on your finger and press information technology into the hole. Y'all can wipe the surface with a newspaper towel or your finger to smooth the surface.

The other big way to make painted trim wait actually good is to caulk all gaps. You will desire to caulk the gap betwixt the wall and the baseboard. You will besides want to caulk the gaps where baseboard see a door frame. Just be very sure yous are using a PAINTABLE white caulk. If it is not paintable, and then the pigment will peel off of it.

To use caulk, use a caulk gun. You clasp the handle until the caulk starts coming out and and then run it along the gap. Information technology will expect something similar the motion-picture show below. Next, have a damp paper towel and run it along the surface to smooth it out. Do that equally many times equally needed until you are happy with how information technology looks.

Supplies:

Forest Putty
PAINTABLE white caulk
Paper towels
H2o

Step three: Prep the Trim

The final step y'all need to exercise before painting oak trim white is prep the surface to "grab" the paint. All wood trim will have a finish on it, which is why information technology appears glossy. Paint does not stick well to a shine glossy surface. Using a primer will help the pigment to stick just to help the primer stick, you demand to exercise a very light sanding.

I recommend taking a sandpaper sponge (220 grit) since they are easier to work with than just the newspaper. Now all you demand to practice is lightly go over every surface. Your goal here is to Non accept off the finish but instead to only give it some texture.

Subsequently yous go over each surface, take a vacuum and get all the dust particles upward. And now you are ready to finally start painting! However, be certain that if yous did all these steps in one solar day to be sure the woods is completely dry earlier painting.

Supplies:

220 grit sandpaper sponge
Vacuum

Pace 4: Paint

In total, you volition be painting each surface 4-5 times depending on how dark the original wood trim is. No matter how light the woods trim is, you need to exercise ii coats of primer. If you don't go plenty primer on, then you will just have to put on more coats of white. So really taking the fourth dimension to prime well actually saves you fourth dimension and supplies. The supplies you will need to pigment include:

Primer (stain blocking)
two" angled brush
White Paint
Paint Cloth (or something to cover the floor)
Tape (or cutting in which is my preferred method)
Paper towels
H2o
Flat razor (to go stale paint off the floor)

Tape the floor and wall (optional)

If you decide to record, then first past taping the flooring and wall above. I start by taping but found I got meliorate results without taping. The tape pulled off some of my pigment from the trim even later on I cut the record off. Virtually painters actually do not record just have the time to cut in.

Information technology takes practice to cutting in but if you start with a cupboard, then y'all can do and get your technique down. Additionally, keep a damp paper towel with you lot so you tin easily wipe paint off of the floor or surface if you lot mess up. If you have an extra paintbrush, then you can wrap a clammy paper towel on it and cutting-in on the surface you lot didn't hateful to go pigment on to go it off.

Put down a textile to cover the flooring

I bought this painters fabric to cover the floor and to requite me a surface to continue all of the paint supplies on. I love it because it is non plastic and reusable. Too, I wash information technology from fourth dimension to time to go along it nice.

Prime number the surface

The primer I used is the Zinnser Bull Eye. I read a lot of reviews near different primers and felt that you can't really get incorrect with the Zinnser or the Kilz. They both take the stain blocking and can stick to sleeky surfaces.

To prime, apply a 2" angled castor. I like the Zibra 2″ angled Sash Trim Brush and a lot of people say you lot can't become wrong with Purdy brushes. I start past cut in the top and bottom. I and so make full in the middle with long strokes to even it all out and make sure I don't leave any bubbles of paint. Your goal hither is to do a thin even coat.

As the primer dries, you will see the wood color since primer doesn't have a lot of pigment. That is okay. The color volition come from the paint. You can topcoat the Zinnser Primer in one hours with either some other coat of primer or the paint. Here is a photo of painted door trim where you can run across the two coats of primer vs. the start coat of white paint.

Paint White

You take finally reached the footstep yous take been waiting for: painting oak trim white. Paint the white exactly like you painted the primer. Cut-in the top and bottom and then fill in the heart with long strokes. Yous also desire to exercise sparse coats that won't drip. It is always better to practice another glaze than to glob it on. One tip to cut in is to wiggle the brush if you have small areas that need more pigment.

Once you stop your coat, give the paint a full 24 hours to dry earlier doing another coat. After the first coat, you lot don't need to worry about cutting in every bit shut this time. The last glaze of white I did was to just make overnice even strokes to make it expect better.

Tips to Cut-in and Pigment Trim:

Only dip the end of the paintbrush into the paint. In one case pigment gets into the top function of the castor, the bristles exercise not lay flat and it volition be harder to get adept castor strokes.

Afterwards dipping the paint brush, tap it on the side instead of wiping excess paint off.
Pigment or dap on the surface before cutting in so you lot don't have likewise much paint on your brush.
When cutting in, try to bending your brush more to get a cleaner cut. In this first picture, the castor is not well angled. In the second film, the brush is angled and so that merely the corner of the brush is cutting in and that is what you lot want.

Motion around until you get a skillful view of where y'all are cutting in.
Have good low-cal and then you can really see what you lot are painting. I grabbed a floor lamp and brought with me to paint in addition to the overhead light.
Never use a wet paintbrush. Once you wash it, y'all need to wait until the beard dry completely. The beard will bunch if the tiptop function of the bristles is wet with pigment or water. In this photograph, the brush on the left has beard that are moisture at the superlative where the metal holds them in line so they clump together.

E'er keep a moisture edge meaning don't bound effectually and work where the pigment is nonetheless wet. Once paint starts to dry out it will become gummy and painting a castor stroke through it volition give you a lot of bumps.

Utilise a razor to remove dried pigment off the flooring (if hardwood or tile)

Protecting the floor will salve you lot a lot of clean up time. If y'all do stop up getting some paint on the flooring, then take a razor to dried paint droplets and it will help you peel the paint up easy.

This merely works for glossy flat surfaces (it doesn't work for rough tile) merely paint won't stick to gloss but will peel, which is why it was then of import that y'all sanded and primed the trim.

I too utilize this to get paint off the floor underneath the trim.

Painting Oak Trim Earlier and Later

Painting all of the trim in your house can have some time and work simply in my opinion is totally worth it.

We decided to pigment our trim because the old trim fabricated the house wait outdated and dreary. I as well didn't similar how it looked with the color scheme I wanted in our house. Additionally, the original trim was not in proficient condition.

After we matched the white to the existing white in our house and gathered our supplies, we were gear up to give it a try.

We started in a closet in case nosotros didn't want to go on and so we could ameliorate our technique.

In a weekend, we washed, fixed, prepped, primed, and painted the trim in two rooms. It was and so beautiful I couldn't wait to continue. A few months later and the white trim will completely transform every room in our house.

If you lot plant this guide to painting oak trim white helpful, please share information technology on Pinterest or Facebook

I am a wife, teacher, and mother to 2 awesome girls. I write about what I am passionate, which is sharing my experiences, failures, and successes on everything from family, marriage and maternity to habitation comeback, DIY firm projects and home making. I too e'er enjoy sharing with my readers tips I learn about selfcare, beauty and skin care for women. Let this space exist a resource for you to pursue your very best day.

Source: https://pursuetoday.com/painting-oak-trim-white-guide/

Posted by: penningtonpostra1962.blogspot.com